Wednesday, September 27, 2017

I'm still sewing.....

and taking pictures of local scout family items for scout patch subject ideas to share.

Stay tuned!


Sunday, May 3, 2015

Boy Scout Sash helpful tip

A fix for the slipping Boy Scout Sash. It's especially helpful for those Scouts where the sash keeps slipping off their shoulder. I learned this trick from another scouter who learned it from her Midwest Scout Camp trip. It's a simple buttonhole. Well, simple if you have a sewing machine that can do buttonholes easily. 
One end is about 1/4" from the inside edge of the sash. The length of the buttonhole is just a bit longer than the button on the shoulder of the scout shirt epaulet. I then cut the inside slit of the buttonhole a little at a time and just long enough for the button to easily pop through and stay secure over time.  Be sure to use coordinating colors of thread to the sash.

 
I recommend the buttonhole over the Merit Badge Sash Pin that can be used to pin a sash in place, for comfort sake and for the extra possibility of loss.  The sash pins have two uncomfortable pins to secure them in place and the pin grips can be lost. The pin itself is one more thing for a scout to lose. A buttonhole is always there.

Securing the sash helps a small scout with no shoulders for the sash to hang from, as well as an older scout who's sash is heavy and pulling forward from the weight of all those merit badges. Securing the sash also helps the scout from losing their sash during scout occasions. I've seen scouts get annoyed with their slipping sashes, take them off, and set the sash down somewhere. Which is one more way for a scout to lose their sash entirely. With that possibility, I hope your scout has his name on all of his scout items. 


Sunday, November 17, 2013

What to do with Mother's Pins in scouting?


A Tiger Cub Mother's Pin

This comes up often with new scouters. You see them on Scout uniforms because parents don't know what to do with them when they're awarded. Sometimes, you'll see them temporarily pinned to hold the upside-down cub rank badge on the shirt until the scout has done his good deed and can permanently attach it to his shirt. But they're Mother's Pins, or Parent's Pins I noticed more recently.

The award can be incorporated into the Cub Scout Rank advancement, or Crossover,  Court of Honor for scouts.  In cub scouts, the parent's accompany their scouts when they receive their awards. When the parent's present their new ranks on their scouts, scouts can pin the "parent's pins"on them. They can share in the achievement of the rank advancement.

So what do you do with them? Well here is an example.

A neckband for Cub and Boy Scout pins.


I purchased this at my local BSA Council store a while back. I have seen mother's wear them to Court of Honor's and Eagle Ceremony's.  I've recently read that it is a civilian award, so you are not supposed to wear it in uniform. But I don't see why not. For verification on how to wear anything scout related, I would suggest checking the most up-to-date BSA Insignia Guide.

I recently found the website of the company who supplied them to the council. www.mothers-pride.com They actually had three to choose from versus the one I had found.

My predicament is I have had two boy scout's and a girl scout. So, with two boy scout's it looks busy and cumbersome
I have thought of possibly sewing them together and then add a small gold ribbon insert in the front center for my daughter's Gold Award Parent's Pin.

 
Mini Gold Award Parent's Pin

But my latest idea is I think I'll do something similar to another proud local mother with multiple Eagle Scout's.  She has a red, white, and blue ribbon with only the three Eagle's Mother's Pin.

I found this resource for the "Proud Parent Pin"

A good reason for using these neckbands or lapel pins is for safer keeping. These items may help you not to be racked with guilt and tearing up the house because you have put the high ranking awards like the  Eagle's Mother's Pin or the Gold Award Parent Pin away for safe keeping in such a special place that you can't find them.  Yes, I'm speaking from experience. I am now in replacement mode to have it ready for my third scout's Court of Honor, my second Eagle Scout. 

Thursday, September 26, 2013

My basic tools when sewing badges....


 My basic tools:
  • Clear thread
  • variety of colored thread for bobbin thread and hand stitching
  • needle & pins
  • seam ripper
  • thimble
  • stapler
  • scissors
  • glue stick
  • toothbrush
  • sharpie or fabric marker
  • scratch paper,  for tallying the scout items and badges.
  • sewing machine (not shown)
  • iron (optional, not shown)


 
Clear thread


 This is the key to save your sanity and time. It hides your stitching, or at least does not make it noticeable how you've sewn the badges and that you didn't sew it perfectly. Also saves from having to change the top colored thread to match each color of the badge or patch you may be sewing, especially multiples. Not everyone has that perfect shade of red or purple or yellow in their stash to match all the patch color possibilities. It's forgiving if you are not a perfect sewer.


A warning about the clear thread, it stretches and breaks. You will need to re-thread your machine more often as it breaks. It also can be hard to see to thread your machine.  It does not work well as the bobbin thread. I don't recommend it. It also does not work well for hand sewing.

If you're not a perfectionist and not worried about the bottom bobbin colored thread matching the underside of the scout item you're sewing, that will also make sewing badges easier.   I tend to use corresponding colors to sashes, cub shirts and boy scout shirts, but not exact matching colors. These last few years I've been using up my stash of odd thread colors and some extra spools that come my way. It helps make it cost effective and convenient not to have to stop and go out of town in search of that perfect thread you need. For Girl Scout vests, I tend to use the colorful thread for the bobbin thread. I think it's neat to see all the different colors as it progressively fills up. Boy's don't seem to pay attention to that kind of thing.  For hand sewing the thread doesn't have to match exactly, as long as you are hiding your stitches.

Variety of colors for bobbin thread and hand sewing.

 
Stapler and small hand scissors
Yes, a stapler. It saves your fingers from all the pinning. Some of the designs on badges and patches can be hard to put a pin through. It saves time when you have a lot of patches to do, especially on sashes. These scissors are handy taking out the staples and cutting small threads. These are what I call my sacrificial scissors. They have nicks in the blades from pulling out staples and occasional broken pins. DO NOT use your good sewing scissors for this.


You'll also notice the glue stick in the main picture. It's another special tool I use to hold little badges in place instead of using pins. Especially those little Cub Scout arrow heads that need to go under the Cub ranks on the left side of the shirt.  The glue holds those little buggers in place just long enough to sew them on without them moving. Using pins with those small badges will only hurt your fingers, bend the pins, make the shirt fabric pucker, and possibly move them out of place. The toothbrush is only used to clean off the glue of the glue stick on the shirt if I made a mistake. 



The sharpie is only used to help put the scout name on the label of that scout item. I try to remind the scout families to be sure to put their name on EVERYTHING. When those scouts play a game or go on an outing and peal off their shirts or vests, they all look the same. It would be heartbreaking to lose those items and try to replace them. 

You'll notice that there is NO fusible web, badge magic, or badge glue. They don't work reliably, they're messy, muck up my machine, and don't leave much room for error. I've fixed plenty of mistakes and reattached ones that don't stay on.  Don't do it.

If you're a scout newbie, there are permanent patches and there are a few that are changed out often, Boy Scout ranks or position of leadership patches for example. If you use the badge glue for those and try to replace them as your scout has advanced, it may be hard to remove, or there may be leftover residue where the badge was adhered. You have to try and sew the next one on in the exact same place, which is no fun since I sew Boy Scout ranks on by hand. The glue also attracts lint and dirt to it. Cross your fingers you put the badges in the right place to begin with and won't have to fix it. It's not very forgiving. I've had some luck with using an iron to remove an excess of glue left after removing a patch, but it still left a discolored outline of the patch on the shirt. It wasn't very attractive.

The Girl Scout iron-on patches I will iron on, it helps to hold them in place so I don't have to pin them and can sew them easier and all at once.  I will help repair patches that may be trying to come loose if they come to me that way from their owners. I'll have to clean the machine needle periodically due to the residue from the iron-on glue.

When badges are sewn by machine it looks cleaner. If the sewing machine tension and gauges are set correctly, they're easily removable with the seam ripper without damage. Sewing the badges on is the best method. The scout items will survive the wear and tear they go through and the laundry.  I suggest washing shirts buttoned and inside out.

In another post, I'll show a few methods I've been using. I have even found a new one to share.  Such a "duh" moment I had when I found it and have already used it a few times.  If you happen to find my blog, let me know if you have a question or suggestion. If I don't know it, I can find someone who does.  I always like learning new things and sharing.





Friday, August 30, 2013

Just starting out...

I'm a big fan of blog's and have been dying to learn how it's all done. So this is my first try at it myself. I've needed to expand access to information in my little cottage business sewing badges here locally.  This blog will be my guinea pig test site. It will serve a purpose and be a learning experience for me.

The badge and patch sewing is not so much for the money but it's a service too for the local scout families. Not many mom's sew, or own a sewing machine, or have time to sew. This way those scouts get to show off all their hard earned badges and activity patches, all excited to show what fun stuff they've been doing. It also helps when they may have uniform inspections. All their uniforms will be in the proper order. No embarassment from the uniform nazi's out there.

I only charge $.50 a badge, but all advice is free! I sew badges and patches for Girl Scouts, Cub Scouts, and Boy Scouts. I've even done some military, karate, and one for a football jersey. I do need to teach myself how to hem scout pants. There may be good money in that. ;)

Thank you for joining me in my journey. I hope I can help you too.